FREE U.S. shipping on every RegMount order
(850) 356-6770 mmcvicker@regmount.com
Order Now
World's only regulator-mounted camera adapter

"HANDS-FREE VIDEO"from your second stage

Watch this one minute video to see the world's only regulator mounted camera adapter in action. Built for scuba divers.

Order RegMount How it works
  • Works with all GoPro versions
  • Fits 2 3/8"–3 1/8" (60–80 mm)
  • Free U.S. shipping
RegMount kit$34.99 Buy
Dive in
Designed by divers, for divers

The world's only regulator-mounted video camera adapter

RegMount puts your action camera on your second stage — exactly where you look, ahead of your exhaust and always in view. Complete access to your purge. Hands completely free.

No more bubbles

RegMount positions the underwater camera in front of the exhaust, so bubbles never cross your shot.

No more wondering if your camera is on

The camera is viewable by the diver at all times — glance down and check the record light.

No more bad angles

RegMount provides a true point-of-view angle at all times: the lens follows your eyes.

No more lost cameras

Your camera stays right in front of you, where you can see it for the entire dive.

No more waiting

The most user-friendly camera mount in the industry — simply attach your camera and go.

LightweightLow ProfileLow DragHands FreeUser FriendlyReliableSafe
Order

RegMount & accessories

Comes complete with the RegMount adapter, a custom black stainless steel clamp, protective silicone band and comfort chin stabilizer. Free U.S. shipping on every order.

View all products

Whale shark and reef fish in deep blue water
Our story

Born on spearfishing dives. Proven over three years and ten prototypes.

We set out to build a camera mount for spearfishing that was completely hands-free, simple to use and positioned so the diver could always see where the camera was pointing. So we went outside the box and mounted the camera directly to the second stage.

  • Three years of testing — which required LOTS of diving
  • Ten prototypes before the final product
  • Customer ideas: octo selfies, probing under rock shelves, light mounting
Read our story
60–80mm
Second-stage fit range
10
Prototypes tested
3yrs
Of in-water testing
100%
Hands-free
How it works

From box to bubble-free footage in minutes

Clamp it on

Slip the protective silicone band over your second stage, seat the RegMount adapter and snug the stainless steel clamp (metric nut). No tools on the boat after the first fit.

Click in your camera

Attach any GoPro or similar action camera with a standard mount. Add the comfort chin stabilizer and aim the lens level with your swimming trim.

Dive & record

The camera sees what you see, ahead of your exhaust bubbles, while your hands stay free for buoyancy, your buddy and your gauges.

Interactive fit checker

Will it fit your regulator?

RegMount fits most SCUBA regulators with a second-stage body between 2 3/8" and 3 1/8" (60–80 mm). Measure yours and check instantly.

How to measure your second stage

Full installation & assembly guide

Will RegMount fit my regulator?

Measure the outside diameter of your second-stage body at its widest point and enter it below. Inches can be typed as decimals (2.75) or fractions (2 3/4).

Supported range: 2 3/8"–3 1/8" (60–80 mm). Enter your measurement to check.

RegMount Videos

Real footage shot from the second stage. Videos load from YouTube in privacy-enhanced mode only after you press play.

Testimonials

What divers say about RegMount — and about the people behind it.

“Absolutely awesome product, I use my RegMount on all dives now and customer service from Michael was brilliant, would definitely do business again. Thanks guys!”

★★★★★
Kyle

“I was in a bit of a rush to get this Reg-Mount for a dive, and needed to upgrade shipping. Shawn at RegMount went way above and beyond to FedEx it to me and be sure it arrived in time for me to leave on the trip; he contacted me by phone and kept me apprised of the status. As for the mount — it is awesome. It attaches in a few seconds with the clamp and is so easy to keep track of the camera that it doesn't take your attention from the diving function. I love this thing!”

★★★★★
Scott T.

“Awesome product and awesome customer service. Went above and beyond to make sure I was a satisfied customer. Thanks RegMount”

★★★★★
Michael L.Ft Dodge, Iowa

“Finally, a mount that actually works and lets me see what I am filming. Love it!”

★★★★★
Gary M.Pace, Florida

“No more ruined shots. Wish I would have thought of it. Thanks RegMount”

★★★★★
Brian A.Pensacola, FL

“Great product! I love my RegMount and use it on every dive. Would definitely recommend to fellow divers.”

★★★★★
SaraVerified buyer
Dive video blog

Shoot better underwater video

Camera settings, color correction, safety, gear care and travel — practical guides from divers who film every dive.

All articles

FAQ

Quick answers

Which cameras work with RegMount?

All versions of GoPro, plus similar action cameras that use the standard GoPro-style mount. GoPro is a trademark of GoPro, Inc.; RegMount is not affiliated with GoPro.

Will it fit my regulator?

RegMount fits most SCUBA regulators with a second-stage body diameter of 2 3/8"–3 1/8" (60–80 mm). Use the fit checker above or contact us with a photo of your regulator.

Can I still use my purge button?

Yes. RegMount was designed to leave complete access to your purge.

Why are there no bubbles in my footage?

Because the camera sits in front of your exhaust. Head and helmet mounts put the lens in the path of rising bubbles; RegMount does not.

How much is shipping?

Shipping is free within the U.S. on RegMount products. See our shipping policy for expedited and international options.

See all frequently asked questions

Contact RegMount Today

Questions about fit, cameras, dealer pricing or your order? Real divers answer — usually within 1–2 business days.

Send us a message on our contact page:

Contact us