Description
Dial in the perfect POV angle
Every diver is different. Regulator shapes vary, mouths and chins vary, and so does the way each of us trims in the water. The RegMount Accessory Pack provides all the items necessary to mount your camera for the best POV angle, so your footage shows what you’re looking at instead of the sand below or the surface above.
The pack is designed to work with the RegMount Regulator Camera Mount and any action camera that uses the standard GoPro-style mount. Buying both? The Complete Diver Kit bundles them at a lower price.
What each part does
- J-hook adapter: changes the height and offset of the camera. Use it when the lens sits too low, too close to your chin, or needs to clear a bulky regulator face.
- 3M adhesive: attaches the base clip mount to a clean, smooth surface where your setup needs it.
- Universal base clip mount: a standard quick-release clip base, so you can clip your camera on and off without undoing the thumb screw. That’s handy for battery swaps between dives.
Specifications
| Feature | Detail |
|---|---|
| SKU | RM0031 |
| Mount standard | GoPro-style finger mount and quick-release clip |
| Works with | RegMount Regulator Camera Mount; GoPro and similar action cameras |
| Intended use | Built for recreational diving use |
| Shipping | Free U.S. shipping |
What’s in the box
- J-hook adapter
- 3M adhesive
- Universal base clip mount
Compatibility
Fits any camera or housing with a standard GoPro-style mount, including all versions of GoPro cameras and similar underwater action cameras. It’s designed to pair with the RegMount adapter, which fits second stages from 2 3/8″ to 3 1/8″ (60–80 mm). Check your regulator on our Fit Guide. GoPro is a trademark of GoPro, Inc. RegMount is not affiliated with GoPro, Inc.
Adhesive tips
For a strong bond, clean the surface with isopropyl alcohol and let it dry. Apply at room temperature and press firmly for at least 30 seconds. Then wait at least 24 hours before getting it wet, and ideally 72 hours before diving. Do this at home before your trip, not on the boat. Tug-test the base before every dive.
Care
Rinse all parts in fresh water after each diving day and let them dry in the shade. Check the clip latch and the thumb screw threads for sand. Replace the adhesive if an edge starts to lift. See our installation guide for step-by-step help.
Assembly on personal equipment is the sole responsibility of the user. RegMount is not responsible for damaged or lost equipment during use or installation. Please dive safely.
Reviews
There are no reviews yet.