Description

Film the dive exactly the way you saw it

RegMount mounts your action camera directly to your regulator’s second stage. When you look at something, your regulator points at it too, so your camera captures true point-of-view footage without any aiming. It sits in front of the exhaust, which means your exhaled bubbles rise behind the lens instead of across it. The camera stays in your line of sight the whole dive, so you always know it’s recording and still attached. And your hands stay free for buoyancy, signals, your buddy, a light or a speargun.

RegMount was designed by divers for divers. It started as a hands-free mount for spearfishing, and three years of testing and ten prototypes turned that idea into a simple, reliable product built for recreational diving use. Divers have since found more uses: octo selfies, probing under rock shelves and ledges, and hands-free lighting. It’s the best and last camera and light mount you will ever need.

Key benefits

• No more bubbles: the camera sits in front of the exhaust.
• No more wondering if your camera is on: you can see it at a glance.
• No more bad angles: the camera points where your head points.
• No more lost cameras: it stays clamped in front of your face.
• No more waiting: once installed, simply attach your camera and go.

Specifications

What’s in the box

• RegMount adapter
• Custom stainless steel clamp (black)
• Protective silicone band
• Comfort chin stabilizer

Compatibility

RegMount fits most scuba regulators with a second-stage body diameter of 2 3/8″ to 3 1/8″ (60–80 mm). Measure yours and use the fit checker on our Regulator Fit Guide. If your regulator has a side exhaust, a compact travel body or an unusual shape, contact us before ordering. Want to fine-tune your camera angle? Add the Accessory Pack, or save with the Complete Diver Kit. GoPro is a trademark of GoPro, Inc. RegMount is not affiliated with GoPro, Inc.

Installation

Fit the silicone band, position the adapter in front of the exhaust, and tighten the stainless clamp until it’s snug, not over-tight. The clamp uses a metric nut. Add the chin stabilizer, mount your camera, confirm purge and exhaust access, and test in a pool first. Full instructions are in our installation guide.

Care

Rinse in fresh water after each diving day, press the purge to flush out salt and sand, and dry in the shade. Check the band and clamp regularly. Replacement clamps and chin stabilizers are sold separately.

It is the responsibility of the user to become familiar with the RegMount before use. Assembly on personal equipment is the sole responsibility of the user. RegMount is not responsible for damaged or lost equipment during use or installation. Please dive safely.