Description
The complete RegMount setup
The Complete Diver Kit combines our two core products, the RegMount Regulator Camera Mount and the RegMount Accessory Pack, in one bundle that costs less than buying both separately. It’s the setup we recommend to most divers. The kit mounts your camera to your regulator’s second stage, and the Accessory Pack lets you fine-tune the angle and add quick-release convenience.
With the camera on your second stage, it points wherever you look. It sits in front of the exhaust, so your bubbles stay out of the shot. It’s always in view, so you know it’s recording. And it leaves your hands completely free. You keep complete access to your purge, and once everything is set up, you simply attach your camera and go.
Why divers choose the bundle
- Best angle from day one: the J-hook adapter lets you adjust the camera’s height and offset for your regulator and trim.
- Faster battery swaps: the universal base clip mount lets you unclip the camera without undoing the thumb screw.
- Better value: save compared with buying the kit and Accessory Pack separately.
Specifications
| Feature | Detail |
|---|---|
| SKU | RM0400 |
| Includes | RegMount kit (RM0304) + Accessory Pack (RM0031) |
| Camera compatibility | All versions of GoPro cameras and similar cameras with a standard GoPro-style mount |
| Regulator compatibility | Second-stage body diameter 2 3/8″–3 1/8″ (60–80 mm) |
| Clamp | Custom stainless steel, black finish, metric nut |
| Intended use | Built for recreational diving use |
What’s in the box
- RegMount adapter
- Custom stainless steel clamp (black)
- Protective silicone band
- Comfort chin stabilizer
- J-hook adapter
- 3M adhesive
- Universal base clip mount
Compatibility
Fits most scuba regulators with a second-stage body diameter of 2 3/8″ to 3 1/8″ (60–80 mm), including many octopus second stages for selfies and ledge probing. Check your regulator with the fit checker on our Regulator Fit Guide, and contact us about side-exhaust, compact travel or unusually shaped second stages. GoPro is a trademark of GoPro, Inc. RegMount is not affiliated with GoPro, Inc.
Setup and care
Follow our step-by-step installation guide. Tighten the clamp’s metric nut until it’s snug, not over-tight. Confirm purge and exhaust access, and test in a pool before open water. If you use the 3M adhesive, let it cure for at least 24 hours, ideally 72, before diving. After each diving day, rinse everything in fresh water and dry it in the shade.
It is the responsibility of the user to become familiar with the RegMount before use. Assembly on personal equipment is the sole responsibility of the user. RegMount is not responsible for damaged or lost equipment during use or installation. Please dive safely.
Reviews
There are no reviews yet.